| Sign In | Join Free | My himfr.com |
|
Smooth communication makes intelligent life!
10 Years
| Ask Lasest Price | |
| Brand Name : | WonderTek |
| Model Number : | WD-1000M-G |
| Certification : | FCC、CE class B,WEEE,RoHS |
| Supply Ability : | 1000 sets per month |
| Delivery Time : | 5-48 days after payment |
Brief introduction
The product transmits the network signals through the existing
power line, not need to wire, where is a socket there is a network.
The signal is stable and not be influenced by the obstacles. It is
easy to use, just plug and play. It supports 128-bits AES data
encryption, can insure the safety of data transmission. It’s stable
function, strong anti-interference ability, higher level
anti-thunder ability and advanced manufacture technique make the
product can meet more demands of the market.
Topology
Specification
| Specification | |
| Model | WD-1000M-G(Industrial grade) |
| Interface | 1*LAN 10/100/1000Base-TX self-adapt RJ45, |
| 1*AC220V power interface, support MDI/MDX | |
| LED display light | LAN PLC PWR |
| Transmission band | 25,50 and 100MHz and MIMO (based on G.9963) |
| Protocol(PHY) | IEEE802.3,IEEE802.3x, IEEE802.3u G.hn |
| Security | 128-AES |
| Transmission rate(PHY) | 800Mbps |
| Modulation | OFDM |
| Management | Firmware remote update,support TR-069(optional) |
| 802.1D Ethernet Bridge | |
| 802.1Q VLAN | |
| Quality of Service(QoS) | |
| IGMO(IPv4)Snooping&MLD(IPv6)Snooping | |
| Working voltage | AC 85V-265V 60/50Hz |
| Working temperature | -40℃-80℃ |
| Size | 159*65*32mm(L×W×H) |
| Weight | 0.28kg |
| Working environment | Working humidity:10%-85% no condense |
| Storage humidity:5%-90% no condense | |
| Certification | FCC,CE class B,WEEE,RoHS |
Features
Packet loss rate: less than 0.01% (100 m, 70% load measurement) ;
Support 7 * 24 hours work ;
Have hardware watchdog function ;
PING value is less than 1 ms.
Electrostatic discharge reactance immunity:
The test voltage monitoring unit should be able to withstand: ±6kV
Direct discharge ,±8kV air discharge. Discharge time in each
sensitive test sites: The positive and negative electrodes 10 times
each ,each discharge interval 1s,The test procedure follows B/T
17626.2-2006.
Electrical fast transient bursts (common mode) immunity:
The test voltage monitoring unit should be able to withstand: The
voltage between power supply port and ground :±2.0kV,Between signal
circuit and earth :±1.0kV,repetition frequency :5KHz,Testing
time:1min/time Testing voltage times: The positive and negative
electrodes 5times each. The test procedure follows B/T
17626.2-2006.
Surge immunity (impact)
The test voltage monitoring unit should be able to withstand:
±2kV,Time interval between successive pulse :1min/time, testing
time: The positive and negative electrodes 5times each. The test
procedure follows B/T 17626.2- 2006. (Protection adopts the model
of full protection and the varistor connects discharge tube in
series )
Vibration defending
Meet TB1433 MX3 level requirements (0~200HZ, 2g accelerated speed,
maximum amplitude 7mm),in the Testing process, it demands the
interface no looseness, device desoldering and falling.
|
|
